News

Tel:086-0769-85884573
LinkMan:Mr Su
Fax:
Address:Houjie town Dongguan Guangdong ChinaTing Feng Science Park third industrial zone

(the new material) to teach you to recognize low temperature hot melt adhesive Po in Hong Kong
From： Dongguan East Tiger New Material Science and Technology Co., Ltd Post date： 2018-03-20


Introduction: popular name, Hong Kong treasure, academic name: hot melt glue Hong Kong treasure, is a new type of high quality material for making shoes. The low temperature hot melt glue port instead of the traditional water port treasure is used to make the front liner and back sleeve of the shoes, the production efficiency is high, the shoes are sturdy and round after finishing, and the shoes are not easy to deform, and the comfort and beauty of the shoes have been greatly improved. 100%, the environmental protection products.

Color: white, blue, green, gray, or customized according to the customer's requirements. Thickness: 0.2mm-2.0mm packing: roll or sheet. Hot melt adhesive Po in Hong Kong to use: all materials fit the interface temperature is 100-120 degrees, the activation temperature is 70-90 degrees, such as the use of hot / cold after a heat setting machine, should set the mold temperature is 125-135 degrees, hold for 7-15 seconds (set temperature and time to change according to the material and fabric conditioning lining materials) such as the use of California; last law process is forming line heating activation system temperature should be set for 7-15 minutes 110-125.
Applicable to all high-grade leather shoes, boots, shoes, children's shoes, work shoes and sports shoes.
Application scope of thickness specification
 
0.4mm + 0.05mm general lightweight men's shoes, shoes, shoes and casual shoes
0.6mm + 0.05mm general lightweight men's shoes, shoes, shoes and casual shoes
0.8mm + 0.05mm general lightweight men's shoes, shoes, shoes and casual shoes
1.0mm + 0.05mm lightweight casual shoes, men's shoes, shoes, shoes and boots
1.2mm + 0.05mm men's shoes, shoes, boots, hiking shoes and shoes for special purposes
1.5mm + 0.05mm men's shoes, shoes, boots, hiking shoes and shoes for special purposes
The method of cutting off: it can be cut off according to the direction (i.e. the horizontal direction) shown in the product.
The cutting edge method can be used by the traditional cutting machine, such as the need to add lubricating oil or (water spray) to drop the edge of the edge of the edge cutting machine.